当前位置: 首页 » 政策法规 » 国外法规 »§175.105 食品用黏合剂(Adhesives)

§175.105 食品用黏合剂(Adhesives)

扫描二维码 分享好友和朋友圈
放大字体  缩小字体 2011-07-15 01:26:57  来源:GPO  浏览次数:11211
核心提示:   该法规列出了可安全用做包装、运输或存放食品的前制品的成分的名单和使用限制条件。
发布单位
FDA
FDA
发布文号 42 FR 56728
发布日期 1977-10-28 生效日期 暂无
有效性状态 废止日期 暂无
备注 该法规列出了可安全用做包装、运输或存放食品的前制品的成分的名单和使用限制条件。

  § 175.105   Adhesives.

  (a) Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions:

  (1) The adhesive is prepared from one or more of the optional substances named in paragraph (c) of this section, subject to any prescribed limitations.

  (2) The adhesive is either separated from the food by a functional barrier or used subject to the following additional limitations:

  (i) In dry foods. The quantity of adhesive that contacts packaged dry food shall not exceed the limits of good manufacturing practice.

  (ii) In fatty and aqueous foods. ( a ) The quantity of adhesive that contacts packaged fatty and aqueous foods shall not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.

  ( b ) Under normal conditions of use the packaging seams or laminates will remain firmly bonded without visible separation.

  (b) To assure safe usage of adhesives, the label of the finished adhesive container shall bear the statement “food-packaging adhesive”。

  (c) Subject to any limitation prescribed in this section and in any other regulation promulgated under section 409 of the Act which prescribes safe conditions of use for substances that may be employed as constituents of adhesives, the optional substances used in the formulation of adhesives may include the following:

  (1) Substances generally recognized as safe for use in food or food packaging.

  (2) Substances permitted for use in adhesives by prior sanction or approval and employed under the specific conditions of use prescribed by such sanction or approval.

  (3) Flavoring substances permitted for use in food by regulations in this part, provided that such flavoring substances are volatilized from the adhesives during the packaging fabrication process.

  (4) Color additives approved for use in food.

  (5) Substances permitted for use in adhesives by other regulations in this subchapter and substances named in this subparagraph: Provided, however, That any substance named in this paragraph and covered by a specific regulation in this subchapter, must meet any specifications in such regulation.

Substances Limitations
Abietic acid  
Acetone  
Acetone-formaldehyde condensate (CAS Reg. No. 25619–09–4)  
Acetone-urea-formaldehyde resin  
N- Acetyl ethanolamine  
Acetyl tributyl citrate  
Acetyl triethyl citrate  
2-Acrylamido-2-methyl-propanesulfonic acid, homopolymer, sodium salt (CAS Reg. No. 35641–59–9)  
Albumin, blood  
(2-Alkenyl) succinic anhydrides in which the alkenyl groups are derived from olefins which contain not less than 78 percent C30and higher groups (CAS Reg. No. 70983–55–0)  
4-[2-[2-2-(Alkoxy (C12-C15) ethoxy) ethoxy]ethyl] disodium sulfosuccinate  
1-Alkyl (C6-C18) amino-3-amino-propane monoacetate  
Alkylated (C4and/or C8) phenols  
Alkyl (C7-C12) benzene  
Alkyl (C10-C20) dimethylbenzyl ammonium chloride  
n- Alkyl(C12, C14, C16, or C18) dimethyl (ethylbenzyl) ammonium cyclohexylsulfamate For use as preservative only.
Alkyl ketene dimers as described in §176.120 of this chapter  
Alkyl (C7-C12) naphthalene  
alpha Olefin sulfonate [alkyl group is in the range of C10-C18with not less than 50 percent C14-C16], ammonium, calcium, magnesium, potassium, and sodium salts  
2-[(2-aminoethyl)amino]ethanol (CAS Reg. No. 111–41–1)  
3-Aminopropanediol For use only in the preparation of polyurethane resins.
Aluminum  
Aluminum acetate  
Aluminum di(2-ethylhexoate)  
Aluminum potassium silicate  
N -β-Aminoethyl- gamma -aminopropyl trimethoxysilane  
3-(Aminomethyl)-3,5,5-trimethylcyclohexylamine  
Aminomethylpropanol  
Ammonium benzoate For use as preservative only.
Ammonium bifluoride For use only as bonding agent for aluminum foil, stabilizer or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Ammonium borate  
Ammonium citrate  
Ammonium persulfate  
Ammonium polyacrylate  
Ammonium potassium hydrogen phosphate  
Ammonium silico-fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Ammonium sulfamate  
Ammonium thiocyanate  
Ammonium thiosulfate  
Amyl acetate  
Anhydroenneaheptitol  
Animal glue as described in §178.3120 of this chapter  
2-Anthraquinone sulfonic acid, sodium salt For use only as polymerization-control agent.
Antimony oxide  
Asbestos  
Asphalt, paraffinic and naphthenic  
Azelaic acid  
Azo -bis- isobutyronitrile  
Balata rubber  
Barium acetate  
Barium peroxide  
Barium sulfate  
Bentonite  
Benzene (benzol)  
1,4-Benzenedicarboxylic acid, bis[2-(1,1-dimethylethyl)-6-[[3-(1,1-dimethylethyl)-2-hydroxy-5-methylphenyl]methyl]-4-methyl-phenyl]ester (CAS Reg. No. 57569–40–1) For use as a stabilizer.
1,2–Benzisothiazolin–3–one (CAS Registry No. 2634–33–5) For use as preservative only.
Benzothiazyldisulfide  
p- Benzoxyphenol For use as preservative only.
Benzoyl peroxide  
Benzyl alcohol  
Benzyl benzoate  
Benzyl bromoacetate For use as preservative only.
p- Benzyloxyphenol   Do.
BHA (butylated hydroxyanisole)  
BHT (butylated hydroxytoluene)  
Bicyclo[2.2.1]hept-2-ene-6-methyl acrylate  
2-Biphenyl diphenyl phosphate  
Bis(benzoate- O )(2-propanolato)aluminum (CAS Reg. No. 105442–85–1) For use only as a reactant in the preparation of polyester resins.
1,2-Bis(3,5-di- tert -butyl-4-hydroxyhydrocinnamoyl)hy-drazine (CAS Reg. No. 32687–78–8) For use at a level not to exceed 2 percent by weight of the adhesive.
1,3-Bis(2-benzothiazolylmercaptomethyl) urea  
4,4′-Bis(α,α-dimethylbenzyl)diphenylamine  
2,6-Bis(1,1-dimethylethyl)-4-(1-methylpropyl)phenol (CAS Reg. No. 17540–75–9) For use as an antioxidant and/or stabilizer only.
2,6-Bis (1-methylheptadecyl) -p- cresol  
4-[[4, 6-Bis(octylthio)6-Bis(octylthio)6-Bis(octylthio)- s -triazin-2-yl]amino]-2,6-di- tert -butylphenol (CAS Reg. No. 991–84–4)  
Bis(tri -n- butyltin) oxide For use as preservative only.
Bis(trichloromethyl)sulfone C.A. Registry No. 3064–70–8 Do.
Borax  
Boric acid  
2-Bromo-2-nitro-1, 3-propanediol (CAS Reg. No. 52–51–7) For use only as an antibacterial preservative.
Butanedioic acid, sulfo-1,4-di-(C9-C11alkyl) ester, ammonium salt (also known as butanedioic acid, sulfo-1,4-diisodecyl ester, ammonium salt [CAS Reg. No. 144093–88–9]). For use as a surface active agent in adhesives.
1,3-Butanediol  
1,4-Butanediol  
1,4-Butanediol modified with adipic acid  
Butoxy polyethylene polyproplyene glycol (molecular weight 900–4,200)  
Butyl acetate  
Butyl acetyl ricinoleate  
Butyl alcohol  
Butylated reaction product of p -cresol and dicyclopentadiene As identified in §178.2010(b) of this chapter.
Butylated, styrenated cresols identified in §178.2010(b) of this chapter  
Butyl benzoate  
Butyl benzyl phthalate  
Butyldecyl phthalate  
1,3-Butylene glycoldiglycolic acid copolymer  
tert- Butyl hydroperoxide  
4,4′-Butylidenebis(6 -tert- butyl -m- cresol)  
Butyl lactate  
Butyloctyl phthalate  
p-tert- Butylphenyl salicylate  
Butyl phthalate butyl glycolate  
p-tert- Butylpyrocatechol For use only as polymerization-control agent.
Butyl ricinoleate  
Butyl rubber polymer  
Butyl stearate  
Butyl titanate, polymerized  
Butyraldehyde  
Calcium ethyl acetoacetate  
Calcium nitrate  
Calcium metasilicate  
Camphor  
Camphor fatty acid esters  
Candelilla wax  
epsilon- Caprolactam-(ethylene-ethyl acrylate) graft polymer  
Carbon black, channel process  
Carbon disulfide-1,1′-methylenedipiperidine reaction product  
Carbon tetrachloride  
Carboxymethylcellulose  
Castor oil, polyoxyethylated (4–84 moles ethylene oxide)  
Cellulose acetate butyrate  
Cellulose acetate propionate  
Ceresin wax (ozocerite)  
Cetyl alcohol  
Chloracetamide  
Chloral hydrate  
Chlorinated liquid n- paraffins with chain lengths of C10-C17, containing 40–70 percent chlorine by weight  
Chlorinated pyridine mixture with active ingredients consisting of 2,3,5,6-tetrachloro-4-(methylsulfonyl) pyridine, 2,3,5,6-tetrachloro-4-(methylsulfinyl) pyridine and pentachloropyridine For use as preservative only.
Chlorinated rubber polymer (natural rubber polymer containing approximately 67 percent chlorine)  
1-(3-Chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride For use as preservative only.
Chlorobenzene  
4-Chloro-3,5-dimethylphenol ( p- chloro -m- xylenol) For use as preservative only.
4-Chloro-3-methylphenol Do.
5-Chloro-2-methyl-4-isothiazolin-3-one (CAS Reg. No. 26172–55–4) and 2-methyl-4-isothiazolin-3-one (CAS Reg. No. 2682–20–4) mixture at a ratio of 3 parts to 1 part, manufactured from methyl-3-mercaptopropionate (CAS Reg. No. 2935–90–2). The mixture may contain magnesium nitrate (CAS Reg. No. 10377–60–3) at a concentration equivalent to the isothiazolone active ingredients (weight/weight) For use only as an antimicrobial agent in polymer latex emulsions.
Chloroform  
Chloroprene  
Chromium caseinate  
Chromium nitrate  
Chromium potassium sulfate  
Cobaltous acetate  
Coconut fatty acid amine salt of tetrachlorophenol For use as preservative only.
Copal  
Copper 8-quinolinolate For use as preservative only.
Coumarone-indene resin  
Cresyl diphenyl phosphate  
Cumene hydroperoxide  
Cyanoguanidine  
Cyclized rubber as identified in §176.170(b)(2) of this chapter  
Cyclohexane  
1,4-Cyclohexanedimethanoldibenzoate (CAS Reg. No. 35541–81–2)  
Cyclohexanol  
Cyclohexanone resin  
Cyclohexanone-formaldehyde condensate  
N- Cyclohexyl p- toluene sulfonamide  
5-Cyclopentadienyl)-(η6-isopropylbenzene)iron(II) hexafluorophosphate (CAS Reg. No. 32760–80–8) For use only as a photoinitiator.
Damar  
Defoaming agents as described in §176.210 of this chapter  
Dehydroacetic acid  
Diacetone alcohol  
Diacetyl peroxide  
N,N′ -Dialkoyl-4,4′-diaminodiphenylmethane mixtures where; the alkoyl groups are derived from marine fatty acids (C12-C24)  
2,5-Di -tert- amylhydroquinone  
Diamines derived from dimerized vegetable oil acids  
Diaryl- p -phenylenediamine, where the aryl group may be phenyl, tolyl, or xylyl  
1,2–Dibromo–2,4–dicyanobutane (CAS Registry No. 3569–65–7) For use as a preservative only.
2,2-Dibromo-3-nitrilopropionamide (CAS Reg. No. 10222–01–2). For use as a preservative only.
Di(butoxyethyl) phthalate  
2,5-Di -tert- butylhydroquinone  
Dibutyl maleate  
2,6-Di -tert- butyl-4-methylphenol For use as preservative only.
Di(C7, C9-alkyl)adipate  
Dibutyl phthalate  
Dibutyl sebacate  
Dibutyltin dilaurate for use only as a catalyst for polyurethane resins  
1,2-Dichloroethylene (mixed isomers)  
Dicumyl peroxide  
Dicyclohexyl phthalate  
Diethanolamine  
Diethanolamine condensed with animal or vegetable fatty acids  
Diethylamine  
Diethylene glycol  
Diethylene glycol adipic acid copolymer  
Diethylene glycol dibenzoate  
Diethylene glycol hydrogenated tallowate monoester  
Diethylene glycol laurate  
Diethylene glycol monobutyl ether  
Diethylene glycol monobutyl ether acetate   
Diethylene glycol monoethyl ether   
Diethylene glycol monoethyl ether acetate   
Diethylene glycol monomethyl ether   
Diethylene glycol monooleate   
Diethylene glycol monophenyl ether   
Diethylene glycol copolymer of adipic acid and phthalic anhydride  
Di(2-ethylhexyl) adipate  
Di(2-ethylhexyl)hexahydrophthalate  
Di(2-ethylhexyl)phthalate  
Diethyl oxalate  
Diethyl phthalate  
Dihexyl phthalate  
Dihydroabietylphthalate  
Di(2-hydroxy-5 -tert- butylphenyl) sulfide  
2,2′-Dihydroxy-5,5′-dichlorodiphenylmethane (dichlorophene)  
4,5-Dihydroxy-2-imidazolidinone  
4-(Diiodomethylsulfonyl) toluene CA Registry No.: 20018–09–01 For use as an antifungal preservative only.
Diisobutyl adipate  
Diisobutyl ketone  
Diisobutylphenoxyethoxyethyl dimethyl benzyl ammonium chloride  
Diisobutyl phthalate  
Diisodecyl adipate  
Diisodecyl phthalate  
Diisooctyl phthalate  
Diisopropylbenzene hydroperoxide  
N,N- Dimethylcyclohexylamine dibutyldithiocarbamate  
Dimethyl formamide  
Dimethyl hexynol  
2,2-Dimethyl-1,3-propanediol dibenzoate  
Dimethyl octynediol  
N- (1,1-dimethyl-3-oxobutyl) acrylamide  
Dimethyl phthalate  
3,5-Dimethyl-1,3,5,2 H- tetrahydrothiadiazine-2-thione For use as preservative only.
Di-β-naphthyl -p- phenylenediamine  
4,6-Dinonyl -o- cresol  
Dinonylphenol  
Di -n- octyldecyl adipate  
Dioctyldiphenylamine  
Dioctylphthalate  
Dioctylsebacate  
Dioxane  
Dipentaerythritol pentastearate  
Dipentamethylene-thiuram-tetrasulfide  
Dipentene  
Dipentene resins  
Dipentene- beta -pinene-styrene resins  
Dipentene-styrene resin (CAS Registry No. 64536–06–7)  
Diphenyl-2-ethylhexyl phosphate  
Diphenyl, hydrogen ated  
N,N′ -Diphenyl -p- phenylenediamine  
Diphenyl phthalate  
1,3-Diphenyl-2-thiourea  

  Dipropylene glycol

  Dipropylene glycol dibenzoate

  Dipropylene glycol monomethyl ether

  Dipropylene glycol copolymer of adipic acid and phthalic anhydride

  Disodium cyanodithioimidocarbonate

  Disodium 4-isodecyl sulfosuccinate (CAS Reg. No. 37294–49–8)

  N,N′ -Distearoylethylenediamine

  Distearyl thiodipropionate

 
3,5-Di- tert- butyl-4-hydroxyhydrocinnamic acid triester with 1,3,5-tris(2-hydroxyethyl)- s -triazine-2,4,6(1 H, 3 H, 5 H )-trione For use as antioxidant only.

  4,4′-Dithiodimorpholine

  n- Dodecylmercaptan

  tert- Dodecylmercaptan

  Dodecylphenoxybenzene-disulfonic acid and/or its calcium, magnesium, and sodium salts

  Elemi gum

  Epichlorohydrin-4,4′-isopropylidenediphenol resin

  Epichlorohydrin-4,4′ -sec- butylidenediphenol resin

  Epichlorohydrin-4,4′-isopropylidene-di-o-cresol resin

  Epichlorohydrin-phenolformaldehyde resin

  Erucamide (erucylamide)

  Ethanolamine

  Ethoxylated primary linear alcohols of greater than 10 percent ethylene oxide by weight having molecular weights of 390 to 7,000 (CAS Reg. No. 97953–22–5)

  Ethoxypropanol butyl ether

  Ethyl alcohol (ethanol)

  5-Ethyl-1,3-diglycidyl-5-methylhydantoin (CAS Reg. No. 15336–82–0)

  Ethylene-acrylic acid-carbon monoxide copolymer (CAS Reg. No. 97756–27–9)

  Ethylene-acrylic acid copolymer, partial sodium salt containing no more than 20 percent acrylic acid by weight, and no more than 16 percent of the acrylic acid as the sodium salt (CAS Reg. No. 25750–82–7)

  Ethylenediamine

  Ethylenediaminetetra-acetic acid, calcium, ferric, potassium, or sodium salts, single or mixed

  Ethylene dichloride

  Ethylene glycol

  Ethylene glycol monobutyl ether

  Ethylene glycol monobutyl ether acetate

  Ethylene glycol monoethyl ether

  Ethylene glycol monoethyl ether acetate

  Ethylene glycol monoethyl ether ricinoleate

  Ethylene glycol monomethyl ether

  Ethylene glycol monophenyl ether

  Ethylene-carbon monoxide copolymer (CAS Reg. No. 25052–62–4) containing not more than 30 weight percent of the units derived from carbon monoxide

  Ethylene-maleic anhydride copolymer, ammonium or potassium salt

  Ethylene-methacrylic acid copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc

  Ethylene-methacrylic acid-vinyl acetate copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc

  Ethylene-octene-1 copolymers containing not less than 70 weight percent ethylene (CAS Reg. No. 26221–73–8)

  Ethylene-propylene-dicyclopentadiene copolymer rubber

  Ethylene, propylene, 1,4-hexadiene and 2,5-norbornadiene tetrapolymer

  Ethylene-vinyl acetate carbon monoxide terpolymer (CAS Registry No. 26337–35–9) containing not more than 15 weight percent of units derived from carbon monoxide

  2,2′-Ethylidenebis (4,6-di- tert -butylphenol) (CAS Reg. No. 35958–30–6)

 
Ethyl -p- hydroxybenzoate For use as preservative only. 

  Ethyl hydroxyethylcellulose

  Ethyl lactate

 
2,2′-Ethylidenebis(4,6-di- tert -butylphenyl)fluorophosphonite (CAS Reg. No. 118337–09–0)   For use as an antioxidant and/or stabilizer only.

  Ethyl phthalyl ethyl glycolate

  Ethyl -p- toluene sulfonamide

  Fats and oils derived from animal or vegetable sources, and the hydrogenated, sulfated, or sulfonated forms of such fats and oils

  Fatty acids derived from animal or vegetable fats and oils; and salts of such acids, single or mixed, as follows:

  Aluminum

  Ammonium

  Calcium

  Magnesium

  Potassium

  Sodium

  Zinc

  Ferric chloride 

 
 Fluosilicic acid (hydrofluosilicic acid)  For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.

   Formaldehyde

  Formaldehyde o- and p- toluene sulfonamide

  Formamide

  Fumaratochromium (III) nitrate

  Furfural

  Furfuryl alcohol

  Fumaric acid

  gamma- Aminopropyltrimethoxysilane (CAS Reg. No. 13822–56–5)

  Glutaraldehyde

  Glycerides, di- and monoesters

 
 Glycerol polyoxypropylene triol, minimum average molecular weight 250 (CAS Reg. No. 25791–96–2)  For use only in the preparation of polyester and polyurethane resins in adhesives.

   Glyceryl borate (glycol boriborate resin)

  Glyceryl ester of damar, copal, elemi, and sandarac

  Glyceryl monobutyl ricinoleate

  Glyceryl monohydroxy stearate

  Glyceryl monohydroxy tallowate

  Glyceryl polyoxypropylene triol (average molecular weight 1,000)

  Glyceryl tribenzoate

  Glycol diacetate

  Glyoxal

  Heptane

  Hexamethylenetetramine

  Hexane

  Hexanetriols

  Hexylene glycol

  Hydroabietyl alcohol

  Hydrocarbon resins (produced by polymerization of mixtures of mono- and di-unsaturated hydrocarbons of the aliphatic, alicyclic, and monobenzenoid type derived both from cracked petroleum and terpene stocks) (CAS Reg. No. 68239–99–6)

  Hydrocarbon resins (produced by the polymerization of styrene and alpha -methyl styrene), hydrogenated (CAS Reg. No. 68441–37–2)

 
Hydrofluoric acid For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.

  Hydrogen peroxide

  Hydrogenated dipentene resin (CAS Reg. No. 106168–39–2)

  Hydrogenated dipentene-styrene copolymer resin (CAS Reg. No. 106168–36–9)

  Hydrogenated- beta -pinene- alpha -pinene-dipentene copolymer resin (CAS Reg. No. 106168–37–0)

 
a- Hydro -omega- hydroxypoly-(oxytetramethylene) For use only in the preparation of polyurethane resins.

  Hydroquinone

  Hydroquinone monobenzyl ether

  Hydroquinone monoethyl ether

  2(2′-Hydroxy-3′,5′ di -tert- amylphenyl) benzotriazole

  Hydroxyacetic acid

  7-Hydroxycoumarin

  Hydroxyethylcellulose

 
2–Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone(CAS Reg. No. 106797–53–9) For use only as a photoinitiator at a level not to exceed 5 percent by weight of the adhesive.

  1-(2-Hydroxyethyl)-1-(4-chlorobutyl)-2 alkyl (C6-C17) imidazolinium chloride

  Hydroxyethyldiethylenetriamine

  β-Hydroxyethyl pyridinium 2-mercaptobenzothiazol

  Hydroxyethyl starch

  Hydroxyethylurea

  Hydroxylamine sulfate

 
5-Hydroxymethoxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, 5-hydroxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, and 5-hydroxypoly-[methyleneoxy]methyl-1-aza-3,7-dioxabicyclo[3.3.0] octane mixture For use only as an antibacterial preservative.

  Hydroxypropyl methylcellulose

  2-(Hydroxymethyl)-2-methyl-1,3-propanediol tribenzoate

  2-Imidazolidinone

 
3–Iodo–2–propynyl-N-butyl carbamate (CAS Reg. No. 55406–53–6) For use only as an antifungal preservative.
Iodoform For use only as polymerization-control agent.

  Isoascorbic acid

  Isobutyl alcohol (isobutanol)

  Isobutylene-isoprene copolymer

  Isodecyl benzoate (CAS Reg. No. 131298–44–7)

  Isophorone

  Isopropanolamine (mono-, di-, tri-)

  Isopropyl acetate

  Isopropyl alcohol (isopropanol)

  Isopropyl -m- and p- cresol (thymol derived)

  4,4′-Isopropylidenediphenol

 
4,4′-Isopropylidenediphenol, polybutylated mixture For use as preservative only.

  Isopropyl peroxydicarbonate

  p- Isopropoxy diphenylamine

  4,4′-Isopropylidene-bis( p -phenyleneoxy)-di-2-propanol

  Itaconic acid

  Japan wax

  Kerosene

  Lauroyl peroxide

  Lauroyl sulfate salts:

  Ammonium

  Magnesium

  Potassium

  Sodium

  Lauryl alcohol

  Lauryl pyridinium 5-chloro-2-mercaptobenzothiazole

  Lignin calcium sulfonate

  Lignin sodium sulfonate

  Linoleamide (linoleic acid amide)

 
Magnesium fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesives.

  Magnesium glycerophosphate

  Maleic acid

  Maleic anhydride-diisobutylene copolymer, ammonium or sodium salt

  Manganese acetate

  Marine oil fatty acid soaps, hydrogenated

  Melamine

  Melamine-formaldehyde copolymer

  2-Mercaptobenzothiazole

 
2-Mercaptobenzothiazole and dimethyl dithiocarbamic acid mixture, sodium salt For use as preservative only.
2-Mercaptobenzothiazole, sodium or zinc salt For use as preservative only.

  Methacrylate-chromic chloride complex, ethyl or methyl ester

  p- Menthane hydroperoxide

  Methyl acetate

  Methyl acetyl ricinoleate

  Methyl alcohol (methanol)

  Methylcellulose

  Methylene chloride

  4,4′-Methylenebis(2,6-di -tert- butylphenol)

  2,2-Methylenebis (4-ethyl-6 -tert- butylphenol)

  2,2-Methylenebis (4-methyl-6-nonylphenol)

  2,2-Methylenebis (4-methyl-6 -tert- butylphenol)

  Methyl ethyl ketone

  Methyl ethyl ketone-formaldehyde condensate

  2-Methylhexane

  1-Methyl-2-hydroxy-4-isopropyl benzene

  Methyl isobutyl ketone

  Methyl oleate

  Methyl oleate-palmitate mixture

  Methyl phthalyl ethyl glycolate

  Methyl ricinoleate

  Methyl salicylate

  a- Methylstyrene-vinyltoluene copolymer resins (molar ratio 1 a methylstyrene to 3 vinyltoluene)

  Methyl tallowate

  Mineral oil

  Monochloracetic acid

  Monooctyldiphenylamine

  Montan wax

  Morpholine

  Myristic acid-chromic chloride complex

  Myristyl alcohol

  Naphtha

  Naphthalene, monosulfonated

  Naphthalene sulfonic acid-formaldehyde condensate, sodium salt

  α-Naphthylamine

  α,α′,α″,α″′-Neopentane tetrayltetrakis [ omega- hydroxypoly (oxypropylene) (1–2 moles)], average molecular weight 400

  Nitric acid

  μ-Nitrobiphenyl

  Nitrocellulose

  2-Nitropropane

  α-( p- Nonylphenyl) -omega- hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters; the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 6–9 moles or 50 moles

  α( p- Nonylphenyl) -omega- hydroxypoly (oxyethylene) produced by the condensation of 1 mole of p- nonylphenol (nonyl group is a propylene trimer isomer) with an average of 1–40 moles of ethylene oxide

  α-( p- Nonylphenyl) -omega- hydroxypoly (oxyethylene) sulfate, ammonium salt: the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 9 or 30 moles

  endo-cis- 5-Norbornene-2,3-dicarboxylic anhydride

  α- cis -9-Octadecenyl -omega- hydroxypoly (oxyethylene); the octadecenyl group is derived from oleyl alcohol and the poly (oxyethylene) content averages 20 moles

  Octadecyl 3,5-di -tert- butyl-4-hydroxyhydrocinnamate

  Octyl alcohol

  Octyldecyl phthalate

  Octylphenol

  Octylphenoxyethanols

  Octylphenoxypolyethoxy-polypropoxyethanol (13 moles of ethylene oxide and propylene oxide)

  Odorless light petroleum hydrocarbons

  Oleamide (oleic acid amide)

  Oleic acid, sulfated

  2,2′-Oxamidobis[ethyl 3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionate] (CAS Reg. No. 70331–94–1)

  Oxazoline

 
α-(oxiranylmethyl)-ω-(oxiranylmethoxy)poly[oxy(methyl-1,2-ethanediyl)], (alternative name: epichlorohydrin-polypropylene glycol) (CAS Reg. No. 26142–30–3) For use as a reactant in the preparation of epoxy-based resins.
2,2′-[oxybis[(methyl-2,1-ethanediyl)-oxymethylene]]bisoxirane, (alternative name: epichlorohydrin-dipropylene glycol) (CAS Reg. No. 41638–13–5)   For use as a reactant in the preparation of epoxy-based resins.

   n- Oxydiethylene-benzothiazole

  Palmitamide (palmitic acid amide)

  Paraffin (C12-C20) sulfonate

  Paraformaldehyde

  Pentachlorophenol

  Pentaerythritol ester of maleic anhydride

 
Pentaerythritol monostearate For use as preservative only.

  Pentaerythritol tetrabenzoate [CAS Registry No. 4196–86–5]

  Pentaerythritol tetrastearate

  2,4-Pentanedione

  Pentasodium diethylenetriaminepentaacetate (CAS Reg. No. 140–01–2)

  Perchloroethylene

  Petrolatum

  Petroleum hydrocarbon resin (cyclopentadiene type), hydrogenated

  Petroleum hydrocarbon resin (produced by the catalytic polymerization and subsequent hydrogenation of styrene, vinyltoluene, and indene types from distillates of cracked petroleum stocks)

  Petroleum hydrocarbon resins (produced by the homo-and copolymerization of dienes and olefins of the aliphatic, alicyclic, and monobenzenoid arylalkene types from distillates of cracked petroleum stocks)

 
Phenol For use as preservative only.

  Phenol-coumarone-indene resin

  Phenolic resins as described in §175.300(b)(3)(vi)

 
Phenothiazine For use only as polymerization-control agent.
Phenyl-β-naphthylamine (free of β-naphthylamine)  
o -Phenylphenol For use as preservative only.

  o -Phthalic acid

  Pimaric acid

  Pine oil

  Piperazine

  Piperidinium pentamethylenedithiocarbamate

  Poly(acrylamide-[2-acrylamide-2-methylpropylsulfonate]-dimethylidiallyl ammonium chloride) sodium salt (CAS Reg. No. 72275-68-4)

  Polyamides derived from reaction of one or more of the following acids with one or more of the following amines:

  Acids:

  Azelaic acid

  Dimerized vegetable oil acids

  Amines:

  Bis(hexamethylene) triamine and higher homologues

  Diethylenetriamine

  Diphenylamine

  Ethylenediamine

  Hexamethylenediamine

  Poly(oxypropylene)diamine (weight average molecular weight 2010) (CAS Reg. No. 9046–10–0)

  Poly(oxypropylene)diamine (weight average molecular weight 440) (CAS Reg. No. 9046–10–0)

  Tetraethylenepentamine

  Triethylenetetramine

  Polybutene, hydrogenated

  Polybutylene glycol (molecular weight 1,000)

  Poly [2(diethylamino) ethyl methacrylate] phosphate

  Polyester of adipic acid, phthalic acid, and propylene glycol, terminated with butyl alcohol

  Polyester of diglycolic acid and propylene glycol containing ethylene glycol monobutyl ether as a chain stopper

  Polyester resins (including alkyd type), as the basic polymer, formed as esters when one or more of the following acids are made to react with one or more of the following alcohols:

  Acids:

  Azelaic acid

  Dimethyl 1,4-cyclohexanedicarboxylate (CAS Reg. No. 94–60–0)

  Dimethyl-5-sulfoisophthalic acid (CAS Reg. No. 50975–82–1) and/or its sodium salt (CAS Reg. No. 3965–55–7)

  Polybasic and monobasic acids identified in §175.300(b)(3)(vii)( a ) and ( b )

  5-sulfo-1,3-benzenedicarboxylic acid, monosodium salt (CAS Reg. No. 6362–79–4)

  Tetrahydrophthalic acid

  Alcohols:

  1,4-Cyclohexanedimethanol

  2,2-Dimethyl-1,3-propanediol

  1,6-Hexanediol (CAS Reg. No. 629–11–8)

  Polyhydric and monohydric alcohols identified in §175.300(b)(3)(vii)( c ) and ( d )

 
Polyethyleneadipate modified with ethanolamine with the molar ratio of the amine to the adipic acid less than 0.1 to 1 For use only in the preparation of polyurethan resins.

  Polyethylene glycol (molecular weight 200–6,000)

  Polyethylene glycol mono-isotridecyl ether sulfate, sodium salt (CAS Reg. No. 150413–26–6)

  Polyethyleneglycol alkyl(C10-C12)ether sulfosuccinate, disodium salt (CAS Reg. No. 68954–91–6)

  Polyethylene, oxidized

  Polyethylene resins, carboxyl modified, identified in §177.1600 of this chapter

  Polyethylenimine

  Polyethylenimine-epichlorohydrin resins

  Poly(ethyloxazoline) (CAS Reg. No. 25805-17-8)

  Polyisoprene

  Polymeric esters of polyhydric alcohols and polycarboxylic acids prepared from glycerin and phthalic anhydride and modified with benzoic acid, castor oil, coconut oil, linseed oil, rosin, soybean oil, styrene, and vinyl toluene

  Polymers: Homopolymers and copolymers of the following monomers:

  Acrylamide

  Acrylic acid

  Acrylonitrile

  Allylmethacrylate (CAS Reg. No. 00096–05–09)

  Butadiene

  Butene

  N-tert- Butylacrylamide

  Butyl acrylate

  1,3-Butylene glycol dimethacrylate

  Butyl methacrylate

  Crotonic acid

  Decyl acrylate

  Diallyl fumarate

  Diallyl maleate

  Diallyl phthalate

  Dibutyl fumarate

  Dibutyl itaconate

  Dibutyl maleate

  Di(2-ethylhexyl) maleate

  Dimethyl-α-methylstyrene

  Dioctyl fumarate

  Dioctyl maleate

  Divinylbenzene

  Ethyl acrylate

  Ethylene

  Ethylene cyanohydrin

  2-Ethylhexyl acrylate

  Ethyl methacrylate

  Fatty acids, C10-13-branched, vinyl esters (CAS Reg. No. 184785–38–4)

  Fumaric acid and/or its methyl, ethyl, propyl, butyl, amyl hexyl, heptyl and octyl esters

  Glycidyl methacrylate

  1–Hexene (CAS Reg. No. 592–41–6)

  2-Hydroxyethyl acrylate

  2-Hydroxyethyl methacrylate

  2-Hydroxypropyl methacrylate

  Isobutyl acrylate

  Isobutylene

  Itaconic acid

  Maleic acid, diester with 2-hydroxyethanesulfonic acid, sodium salt

  Maleic anhydride

  Methacrylic acid

  Methyl acrylate

  N,N′- Methylenebisacrylamide

  Methyl methacrylate

  N- Methylolacrylamide

  Methyl styrene

  -Methyl styrene

  Monoethyl maleate

  Monomethyl maleate

  Mono (2-ethylhexyl) maleate

  5-Norbornene-2 3-dicarboxylic acid, mono -n- butyl ester

  1-Octene (CAS Reg. No. 111–66–0)

  Propyl acrylate

  Propylene

  Styrene

  Triallyl cyanurate

  Vinyl acetate

  Vinyl alcohol (from alcoholysis or hydrolysis of vinyl acetate units)

  Vinyl butyrate

  Vinyl chloride

  Vinyl crotonate

  Vinyl ethyl ether

  Vinyl hexoate

  Vinylidene chloride

  Vinyl methyl ether

  Vinyl pelargonate

  Vinyl propionate

  Vinyl pyrrolidone

  Vinyl stearate

  Polyoxyalkylated-phenolic resin (phenolic resin obtained from formaldehyde plus butyl- and/or amylphenols, oxyalkylated with ethylene oxide and/or propylene oxide)

  Poly(oxycaproyl) diols and triols (minimum molecular weight 500)

  Polyoxyethylated (40 moles) tallow alcohol sulfate, sodium salt

  Polyoxyethylene (20 mol)—anhydrous lanolin adduct

  Polyoxyethylene (molecular weight 200) dibenzoate

  Polyoxyethylene (molecular weight 200–600) esters of fatty acids derived from animal or vegetable fats and oils (including tall oil)

  Polyoxyethylene (15 moles) ester of rosin

  Polyoxyethylene (4–5 moles) ether of phenol

  Polyoxyethylene (25 moles)—glycerol adduct

  Polyoxyethylene (40 moles) stearate

  Polyoxyethylene (5–15 moles) tridecyl alcohol

  Polyoxypropylene (3 moles) tridecyl alcohol sulfate

  Polyoxypropylene (20 moles) butyl ether

  Polyoxypropylene (40 moles) butyl ether

  Polyoxypropylene (20 moles) oleate butyl ether

  Polyoxypropylene-polyoxyethylene condensate (minimum molecular weight 1,900)

  Polypropylene glycol (minimum molecular weight 150)

  Polypropylene glycol (3–4 moles) triether with 2-ethyl-2-(hydroxymethyl)-1,3-propane-diol, average molecular weight 730

 
Polypropylene glycol dibenzoate (CAS Reg. No. 72245–46–6) For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.

  Polypropylene, noncrystalline

  Polysiloxanes:

  Diethyl polysiloxane

  Dihydrogen polysiloxane

  Dimethyl polysiloxane

  Diphenyl polysiloxane

  Ethyl hydrogen polysiloxane

  Ethyl phenyl polysiloxane

  Methyl ethyl polysiloxane

  Methyl hydrogen polysiloxane

  Methyl phenyl polysiloxane

  Phenyl hydrogen polysiloxane

  Polysorbate 60

  Polysorbate 80

  Polysorbate 20 (polyoxyethylene (20) sorbitan monolaurate)

  Polysorbate 40 (polyoxyethylene (20) sorbitan monopalmitate)

  Poly[styrene-co-disodium maleate-co-α-( p- nonyl-phenyl) -omega- ( p- vinyl-benzyl)poly(oxyethylene)] terpolymer

  Polytretrafluoroethylene

  Polyurethane resins produced by: (1) reacting diisocyanates with one or more of the polyols or polyesters named in this paragraph, or (2) reacting the chloroformate derivatives of one or more of the polyols or polyesters named in this paragraph with one or more of the polyamines named in this paragraph, or (3) reacting toluene diisocyanate or 4,4′ methylenebis(cyclohexylisocyanate) (CAS Reg. No. 5124–30–1) with: (i) one or more of the polyols or polyesters named in this paragraph and with either N -methyldiethanolamine (CAS Reg. No. 105–59–9) and dimethyl sulfate (CAS Reg. No. 77–78–1) or dimethylolpropionic acid (CAS Reg. No. 4767–03–7) and triethylamine (CAS Reg. No. 121–44–8), or (ii) a fumaric acid-modified polypropylene glycol or fumaric acid-modified tripropylene glycol), triethylamine (CAS Reg. No. 107–15–3), and ethylenediamine (CAS Reg. No. 121–44–8), or (4) reacting meta -tetramethylxylene diisocyanate (CAS Reg. No. 2778–42–9) with one or more of the polyols and polyesters listed in this paragraph and with dimethylolpropionic acid (CAS Reg. No. 4767–03–7) and triethylamine (CAS Reg. No. 121–44–8), N -methyldiethanolamine (CAS Reg. No. 105–59–9), 2–dimethylaminoethanol (CAS Reg. No. 108–01–0), 2–dimethylamino–2–methyl–1–propanol (CAS Reg. No. 7005–47–2), and/or 2–amino–2–methyl–1–propanol (CAS Reg. No. 124–68–5)

  Polyvinyl alcohol modified so as to contain not more than 3 weight percent of comonomer units derived from 1-alkenes having 12 to 20 carbon atoms

  Polyvinyl butyral

  Polyvinyl formal

 
Potassium ferricyanide For use only as polymerization-control agent.
Potassium N- methyldithiocarbamate  
Potassium pentachlorophenate For use as preservative only.

  Potassium permanganate

  Potassium persulfate

  Potassium phosphates (mono-, di-, tribasic)

  Potassium tripolyphosphate

  α, α′, α″-1,2,3-Propanetriyltris [ omega -(2,3-epoxypropoxy) poly (oxypropylene) (24 moles)]

  β-Propiolactone

  Propyl alcohol (propanol)

  Propylene carbonate

  Propylene glycol and p-p′ -isopropylidenediphenol diether

 
Propylene glycol dibenzoate (CAS Reg. No. 19224–26–1) For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.

  Propylene glycol esters of coconut fatty acids

  Propylene glycol monolaurate

  Propylene glycol monomethyl ether

  Propylene glycol monostearate

  α, α′, α″-[Propylidynetris (methylene)] tris [ omega- hydroxypoly (oxypropylene) (1.5 moles minimum)], minimum molecular weight 400

 
Quaternary ammonium chloride (hexadecyl, octadecyl derivative) For use as preservative only.

  Rosin (wood, gum, and tall oil rosin), rosin dimers, decarboxylated rosin (including rosin oil, disproportionated rosin, and these substances as modified by one or more of the following reactants:

  Alkyl (C1-C9) phenolformaldehyde

  Ammonia

  Ammonium caseinate -p- Cyclohexylphenolformaldehyde

  Diethylene glycol

  Dipentaerythritol

  Ethylene glycol

  Formaldehyde

  Fumaric acid

  Glycerin

  Hydrogen

  Isophthalic acid

  4,4′-Isopropylidenediphenol-epichlorohydrin (epoxy)

  4,4′-Isopropylidenediphenol-formaldehyde

  Maleic anhydride

  Methyl alcohol

  Pentaerythritol

  Phthalic anhydride

  Polyethylene glycol

  Phenol-formaldehyde

  Phenyl μ-cresol-formaldehyde

  p- Phenylphenol-formaldehyde

  Sulfuric acid

  Triethylene glycol

  Xylenol-formaldehyde

  Rosin salts (salts of wood, gum, and tall oil rosin, and the dimers thereof, decarboxylated rosin disproportionated rosin, hydrogenated rosin):

  Aluminum

  Ammonium

  Calcium

  Magnesium

  Potassium

  Sodium

  Zinc

  Rosin, gasoline-insoluble fraction

  Rubber hydrochloride polymer

  Rubber latex, natural

 
Salicylic acid For use as preservative only.

  Sandarac

  Sebacic acid

  Shellac

  Silicon dioxide as defined in §172.480(a) of this chapter

  Sodium alkyl (C2-C13.5aliphatic) benezenesulfonate

  Sodium aluminum pyrophosphate

  Sodium aluminum sulfate

  Sodium bisulfate

  Sodium calcium silicate

  Sodium capryl polyphosphate

  Sodium carboxymethylcellulose

  Sodium chlorate

  Sodium chlorite

  Sodium chromate

  Sodium decylsulfate

 
Sodium dehydroacetate For use as preservative only.

  Sodium di-(2-ethylhexoate)

  Sodium di-(2-ethylhexyl) pyrophosphate

  Sodium dihexylsulfosuccinate

  Sodium dissobutylphenoxydiethoxyethyl sulfonate

  Sodium diisobutylphenoxymonoethoxyethyl sulfonate

  Sodium diisopropyl- and triisopropylnaphthalenesulfonate

  Sodium dimethyldithiocarbamate

  Sodium dioctylsulfosuccinate

  Sodium n- dodecylpolyethoxy (50 moles) sulfate

  Sodium ethylene ether of nonylphenol sulfate

  Sodium 2-ethylhexyl sulfate

 
Sodium fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride for all sources not to exceed 1 percent by weight of the finished adhesive.

  Sodium formaldehyde sulfoxylate

  Sodium formate

  Sodium heptadecylsulfate

  Sodium hypochlorite

  Sodium isododecylphenoxypolyethoxy (40 moles) sulfate

  Sodium N- lauroyl sarcosinate

  Sodium metaborate

  Sodium α-naphthalene sulfonate

  Sodium nitrate

  Sodium nitrite

  Sodium oleoyl isopropanolamide sulfosuccinate

 
Sodium pentachlorophenate For use as preservative only.

  Sodium perborate

  Sodium persulfate

 
 Sodium μ-phenylphenate  For use as preservative only.

   Sodium polyacrylate

  Sodium polymethacrylate

  Sodium polystyrene sulfonate

 
Sodium salicylate For use as preservative only.
Sodium salt of 1-hydroxy 2(1H)-pyridine thione  Do.

   Sodium tetradecylsulfate

  Sodium thiocyanate

  Sodium bis-tridecylsulfosuccinate

  Sodium xylene sulfonate

  Sorbitan monooleate

  Sorbitan monostearate

  Soybean oil, epoxidized

  Spermaceti wax

  Sperm oil wax

 
Stannous 2-ethylhexanoate For use only as a catalyst for polyurethane resins.

  Stannous stearate

  Starch hydrolysates

  Starch or starch modified by one or more of the treatments described in §§172.892 and 178.3520 of this chapter

  Starch, reacted with a urea-formaldehyde resin

  Starch, reacted with formaldehyde

  Stearamide (stearic acid amide)

  Stearic acid

  Stearic acid-chromic chloride complex

  Stearyl-cetyl alcohol, technical grade, approximately 65 percent–80 percent stearyl and 20 percent–35 percent cetyl

  Strontium salicylate

  Styrenated phenol

  Styrene block polymers with 1,3-butadiene

  Styrene-maleic anhydride copolymer, ammonium or potassium salt

  Styrene-maleic anhydride copolymer (partially methylated) sodium salt

  Styrene-methacrylic acid copolymer, potassium salt

  Sucrose acetate isobutyrate

  Sucrose benzoate

  Sucrose octaacetate

 
2–sulfoethyl methacrylate (CAS Registry No. 10595–80–9)  For use at levels not to exceed 2 percent by weight of the dry adhesive.

   α-Sulfo-omega-(dodecyloxy)poly (oxyethylene), ammonium salt

  Sulfonated octadecylene (sodium form)

  Sulfosuccinic acid 4-ester with polyethylene glycol dodecyl ether disodium salt (alcohol moiety produced by condensation of 1 mole of n -dodecyl alcohol and an average of 5–6 moles of ethylene oxide, Chemical Abstracts Service Registry No. 039354–45–5)

  Sulfosuccinic acid 4-ester with polyethylene glycol nonylphenyl ether, disodium salt (alcohol moiety produced by condensation of 1 mole of nonylphenol and an average of 9–10 moles of ethylene oxide) (CAS Reg. No. 9040–38–4)

  Sulfur

  Synthetic primary linear aliphatic alcohols whose weight average molecular weight is greater than 400 (CAS Reg. No. 71750–71–5)

  Synthetic wax polymer as described in §176.170(a)(5) of this chapter

  Tall oil

  Tall oil fatty acids, linoleic and oleic

  Tall oil fatty acid methyl ester

  Tall oil, methyl ester

  Tall oil pitch

  Tall oil soaps

  Tallow alcohol (hydrogenated)

  Tallow amine, secondary (hexadecyl, octadecyl), of hard tallow

  Tallow, blown (oxidized)

  Tallow, propylene glycol ester

  Terpene resins (α-and β-pinene) homopolymers, copolymers, and condensates with phenol, formaldehyde, coumarone, and/or indene

  Terphenyl

  Terphenyl, hydrogenated

  Terpineol

  Tetraethylene pentamine

  Tetraethylthiuram disulfide

  Tetrahydrofuran

  Tetrahydrofurfuryl alcohol

  Tetra-isopropyl titanate

  Tetrakis[methylene (3,5-di -tert- butyl-4-hydroxy-hydro-cinnamate)] methane

  a[ p- (1,1,3,3-Tetramethylbutyl) phenyl] -omega- hydroxypoly-(oxyethylene) produced by the condensation of 1 mole of p- (1,1,3,3-tetramethylbutyl) phenol with an average of 1–40 moles of ethylene oxide

  a-[ p- (1,1,3,3-Tetramethylbutyl) phenyl] -omega- hydroxy-poly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and their sodium, potassium, and ammonium salts having a poly(oxyethylene) content averaging 6–9 or 40 moles

  Tetramethyl decanediol

  Tetramethyl decynediol

  Tetramethyl decynediol plus 1–30 moles of ethylene oxide

  Tetramethylthiuram monosulfide

  Tetrasodium N- (1,2-dicarboxyethyl) N- octadecylsulfosuccinamate

  4,4′-Thiobis-6 -tert- butyl -m- cresol

  Thiodiethylene-bis(3,5-di -tert- butyl-4-hydroxyhydrocinnamate)

  2,2′-(2,5-Thiophenediyl) bis[5 -tert- butylbenzoxazole]

  Thiram

 
 Thymol  For use as preservative only.For use as preservative only.

   Titanium dioxide

  Titanium dioxide-barium sulfate

  Titanium dioxide-calcium sulfate

  Titanium dioxide-magnesium silicate

  Toluene

  Toluene 2,4-diisocyanate

  Toluene 2,6-diisocyanate

  o - and p- Toluene ethyl sulfonamide

  o - and p- Toluene sulfonamide

  p- Toluene sulfonic acid

  p- ( p ′-Toluene-sulfonylamide)-diphenylamide

  Triazine-formaldehyde resins as described in §175.300(b)(3)(xiii)

  Tributoxyethyl phosphate

  Tributylcitrate

 
Tri -tert- butyl -p- phenyl phenol For use as preservative only.
Tributyl phosphate  
Tributyltin chloride complex of ethylene oxide condensate of dehydroabietylamine For use as preservative only.
Tri -n- butyltin acetate For use as preservative only.
Tri -n- butyltin neodecanoate  Do.

  1,1,1-Trichloroethane

  1,1,2-Trichloroethane

  Trichloroethylene

  Tri-β-chloroethylphosphate

  Tridecyl alcohol

  Triethanolamine

  3-(Triethoxysilyl) propylamine

  Triethylene glycol

  Triethylene glycol dibenzoate

  Triethylene glycol di(2-ethylhexoate)

  Triethylene glycol polyester of benzoic acid and phthalic acid

  Triethylhexyl phosphate

  Triethylphosphate

  2,4,5-Trihydroxy butyrophenone

  Triisopropanolamine

  Trimethylol propane

  2,2,4-Trimethylpentanediol-1,3-diisobutyrate

  Trimeric aromatic amine resin from diphenylamine and acetone of molecular weight approximately 500

 
Tri(nonylphenyl) phosphite-formaldehyde resins As identified in §177.2600(c)(4)(iii) of this chapter. For use only as a stabilizer.

  Triphenylphosphate

  Tripropylene glycol monomethyl ether

  1,3,5-Tris (3,5-di -tert- butyl-4-hydroxy-benzyl)-triazine-2,4,6 (1H,3H,5H)-trione

  Tris ( p- tertiary butyl phenyl) phosphate

  Tris(2-methyl-4-hydroxy-5 -tert- butyl-phenyl)butane

  Trisodium N -hydroxyethylethylenediaminetriacetate (CAS Reg. No. 139–89–9)

  Turpentine

  Urea-formaldehyde resins as described in §175.300(b)(3)(xii)

  Vegetable oil, sulfonated or sulfated, potassium salt

  Vinyl acetate-maleic anhydride copolymer, sodium salt

  Waxes, petroleum

  Wax, petroleum, chlorinated (40% to 70% chlorine)

  Waxes, synthetic paraffin (Fischer-Tropsch process)

  3-(2-Xenolyl)-1,2-epoxypropane

  Xylene

  Xylene (or toluene) alkylated with dicyclopentadiene

  Zein

  Zinc acetate

  Zinc ammonium chloride

  Zinc dibenzyl dithiocarbamate

  Zinc dibutyldithiocarbamate

  Zinc diethyldithiocarbamate

  Zinc di(2-ethylhexoate)

  Zinc formaldehyde sulfoxylate

  Zinc naphthenate and dehydroabietylamine mixture

  Zinc nitrate

  Zinc orthophosphate

  Zinc resinate

  Zinc sulfide

  Zineb (zinc ethylenebis-dithiocarbamate)

  Ziram (zinc dimethyldithiocarbamate)

 

  [42 FR 14534, Mar. 15, 1977; 42 FR 56728, Oct. 28, 1977]
 地区: 美国 
 标签: 名单 成分 包装 
食品伙伴网提供标准法规解读、舆情监控、合规咨询、申报注册等服务。
电询:0535-2129301
QQ:2891238009
食品标法圈
实时把握食品标法动态
请扫码关注食品标法圈

声明:

① 凡本网所有原始/编译文章及图片、图表的版权均属食品伙伴网所有,如要转载,需注明“信息来源:食品伙伴网”。
② 凡本网注明“信息来源:XXX(非食品伙伴网)”的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责。
※ 邮箱:law#foodmate.net(发邮件时请将#换成@) QQ:139307733

 
 
[ 政策法规搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 

 
 
按分类浏览
国家法规 (11358) 国外法规 (3603)
地方法规 (39742) 法规动态 (210)
法规解读 (2623) 其他法规 (506)
推荐国外法规
点击排行
按国家或地区浏览

法规中心  关于我们  广告业务  联系我们  信息服务

Processed in 0.053 second(s), 10 queries, Memory 4.79 M